How to Install Feeder Cable Clamp in Telecom?
What is Feeder Cable Clamp in Wireless Base Station
Feeder Cable Clamp is also called cable hanger, are widely used in site installation to fix coaixal cable,braid cable, telecom cable, fiber cable, smooth cable and hybrid cable ect.
HDG Telecom provide various feeder cable clamp. For example Through Type, Double Hole Type, Hook Type Self-locking, Throat Hoop Type, Click-on Type, Radiating Cable Hanger Type and Optical Fiber Power Clamp Type. And also support cable size 1/4", 3/8", 1/2", 7/8", 1-1/4" and 1-5/8".
How to Install Feeder Cable Clamp in Telecom
EX through type feeder cable clamp
Firstly, loosen the nut and flat gasket at the end of cable clamp.
Secondly, loosen two pieces single plastic clamp on the M8 threaded rods.
Thridly, Plunge the cable into the hole of plastic clamp in turn.
Finally, to ratate the nut which was loosed in the first step to the screw again, and then lock all nuts and flat washer, use torque of lock M8 nut for clamp until it is very tight. And then finished. Pls see the below install picture.
What are the ADVANTAGES of Feeder Cable Clamp?
1. Quick install, just take seconds.
2. Easy removable and reusable.
3. durability, simplicity of installation.
4. Has paased SGS test report, anti-UV test for plastic clamp and salt spray test for SUS304.
5. Use hifh and low temperature deformation resistance & long time in the open air without any oxidation.