Page Copyright © 2019 DEACHO Communication Technology Co., Ltd 闽ICP备案000000000号 Powered by 300.cn
Address
5th floor, No.63, Pingcheng North Rd, Haicang Area, Xiamen City, China
Tel
+86-592-6088457
+86 18030037753
PRODUCTS
Page view:
Product name
2 runs optic fiber cable and power cable hanger clamp for wireless tower
Part No.:
CC21AC-1RA
Quantity
-
+
Inquiry
Product description
Product Description
2 runs optic fiber cable and power cable hanger clamp for wireless tower
Description.
Cable Clamp is designed for wireless application, and widely used in site installation to fix coaxial feeder cables to base towers, these clamps provide an efficient way of managing & securing the feeder installation system, they are strictly made out of non-rusting product to sustain all weather conditions. They come with angle member adapter and necessary hardware, the angle member adapter fastens the clamp to tower, cable ladder, angle bar etc. It is mainly composed of 304 stainless steel and anti-ultraviolet polypropylene and rubber grommet which is UV resistant material. The design offers least stress and maximum grip to manage the cable system.
|
||||
Application.
Feeder clamps for coaxial RF cable are used with following products;
● Telecom cable ● Fiber cable ●Coaxial cable
●Feeder cable ● Hybrid cable ● Corrugated cable
●Smooth cable ●Braid cable
|
||||
CC23AC-3RA Detail.
CC23AC-3RA is a Combined clamp, two holes per stack, one stacks, 2 holes in total, used to fix power cable and fiber cable at the same time. One hole without rubber for round fiber cable in 6.5-7mm outer diameter and one hole with rubber for cables in 10-11mm outer diameter. It can fix three fiber and three power cables at most. The C-shape bracket and pressing board are compact and terse. It is simple to fix the cables reliably.
|
Technical Specifications.
Item No.
|
CC21AC-1RA
|
Cable Per Clamp
|
2
|
Product Line
|
Cable Clamp
|
Operating Temperature
|
-40℃ to +75℃
|
Product Type
|
2 Hole Per Layer, Three Layer
|
Salt Spray Test
|
96h, No Rustiness
|
Compatible Cable Size
|
(6.5-7)x1 run + (10-11)x1run, remove rubber can use for (13.5-14.3)x2 runs
|
UV
|
Protected
|
Component Part.
Part Name
|
Specification
|
Quantity
|
Material
|
Angle Adapter
|
40x33x24x4.6
|
1
|
SS304
|
Gasket
|
Φ20
|
1
|
SS304
|
Bolt
|
M8 X 40
|
1
|
SS304
|
Threaded Rod
|
M8 X 50
|
1
|
SS304
|
Plastic Support Block
|
A hole:6.2*7.2, B holes: 13.5*14.5, 2 holes per layer, Outer size: 40.7*23*32.2
|
3
|
PP
|
Rubber Gromeet
|
1pc, inner size: 9*13
|
3
|
Rubber
|
Nut
|
M8
|
3
|
SS304
|
Flat Washer
|
Φ8
|
2
|
SS304
|
Spring Washer
|
Φ8
|
2
|
SS304
|
Previous article
Hose type cable hanger clamp for 1/2 coax feeder cable
Cable hanger for power cables and Fiber Optic cables
Next article