Search

Page Copyright © 2019 DEACHO Communication Technology Co., Ltd    闽ICP备案000000000号   Powered by 300.cn

Google+ LinkedIn Facebook Twitter Addthis

Address

5th floor, No.63, Pingcheng North Rd, Haicang Area, Xiamen City, China

Tel

+86-592-6088457

+86 18030037753

PRODUCTS

Page view
产品名称

Cable assembly with slid-on silicone boot, weatherproofing shroud for 1/2" jumper cable with 4.3-10 male connector

Part No.
JC12-4310MM-SB
Quantity
-
+
没有此类产品
I want to make an inquiry
Product description
Product parameters

Cable assembly with slid-on silicone boot, weatherproofing shroud for 1/2" jumper cable with 4.3-10 male connector 

Description.

Jumper cables are mainly used between main feeders and antennas or between main feeders and system equipment. Jumper cables are used in areas that require extremely small bending radius. Jumper cable is premium soldered, premium molded in factory, assembled with fully soldered connectors.  The use of jumpers provides greater flexibility, reduced mechanical stress on antennas and connectors and better accessibility of feeder terminations. Jumper cables offer outstanding electrical performance along with high durability for superior environmental sealing for long life reliability. 

 

Features/Benefits.

 

Silicone boots are one of  weatherproofing solutions for the cable connection.

Silicone boot is pre-installed on the cable, simply slide the boots up the cable and over the connectors, so install faster and simple. 

Boots are manufactured from a highly UV resistant silicone rubber.

Production Information.

 

Item No.: JC12-4310MM-SB

Cable type: 1/2"

Cable length: customizable

Connector A: 4.3-10 male

Connector B: 4.3-10 male

Silicone boot: included

Interface
According to
IEC 61169-54
Electrical
Impedance
50 ohm
Frequency
DC-6GHz
 
VSWR
(DC-3GHz)≤1.08
(3-6GHz)≤1.12
PIM (@2-tone×20w)
≤-160dBC
Dielectric withstanding voltage
≥2500V RMS, 50Hz, at sea level
Dielectric Resistance
≥5000MΩ
Center contact resistance
≤1.0m Ω
Outer contact resistance
≤1.0m Ω
Mechanical
Mating cycles
≥500 times
Watertightness (1m, 1hour)
IP68
Rosh-compliance
complianced
Temperature range
-40℃~+85℃
Material and plating
Body
Brass / Tri-alloy plating
Center conductor
Phosphor bronze or bbrass/ Ag plating
Dielectric
PTFE
Gasket
Silicone rubbber
Other
Brass / Ni plating
 
Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article

Relevant Recommended Products