1/2 in superflex RF coaxial Jumper cable with 4.3-10 male and female connector on both sides

Part No.： JC12S-4310MF-G08

Quantity

Inquiry

Retail price：

$ 0

Market value:

$ 0

Remaining stock:

Add to Cart

Buy Now

隐藏域元素占位

Product description

Jumper cables are mainly used between main feeders and antennas or between main feeders and system equipment. Jumper cables are used in areas that require extremely small bending radius. Jumper cable is premium soldered, premium molded in factory, assembled with fully soldered connectors. The use of jumpers provides greater flexibility, reduced mechanical stress on antennas and connectors and better accessibility of feeder terminations. Jumper cables offer outstanding electrical performance along with high durability for superior environmental sealing for long life reliability.

1/2 in super flex RF coaxial Jumper cable with 4.3-10 male and female connector on both sides

Description.

Features/Benefits.

Jumper cables are designed and produced to have features as below

● High pull-off strength
● Excellent V.S.W.R performance.
● Low and stable intermodulation.
● Weatherproof

Production Information.

Item No.: JC12S-4310MF-G08

Cable type: 1/2" superflex

Cable length: customizable

Connector A: 4.3-10 male

Connector B: 4.3-10 female

Performance.

Interface
According to	IEC 61169-54
Electrical
Impedance	50 ohm
Frequency	DC-6GHz
VSWR	(DC-3GHz)≤1.08
VSWR	(3-6GHz)≤1.12
PIM (@2-tone×20w)	≤-165dBC
Dielectric withstanding voltage	≥2500V RMS, 50Hz, at sea level
Dielectric Resistance	≥5000MΩ
Center contact resistance	≤1.0m Ω
Outer contact resistance	≤1.0m Ω
Mechanical
Mating cycles	≥500 times
Watertightness (1m, 1hour)	IP68
Rosh-compliance	complianced
Temperature range	-40℃~+85℃
Material and plating
Body	Brass / Tri-alloy plating
Center conductor	Phosphor bronze or bbrass/ Ag plating
Dielectric	PTFE
Gasket	Silicone rubbber
Other	Brass / Ni plating