Page Copyright © 2019 DEACHO Communication Technology Co., Ltd 闽ICP备19001873号 Powered by 300.cn
+86-592-6088457
+86 18030037753
5th floor, No.63, Pingcheng North Rd,
Haicang Area, Xiamen City, China
HOT PRODUCTS
FEEDBACK
CONTACT US
Mobile website
PRODUCTS
Page view：
Product name
EPDM rubber splices cold shrink tubes for coaxial cable connections, similar 3M CXS-4
Part No.:
ECS53X203
Quantity
-
+
Inquiry
Product description
Product Description
EPDM rubber splices cold shrink tubes for coaxial cable connections, similar 3M CXS-4
|
Description.
EPDM Cold Shrink Tubes are designed to provide a quick and easy method for protecting and sealing for an inline connection, terminal lug, etc., cold shrink tubing is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core.
The core is removed after the tube has been positioned for installation, allowing the tube to shrink and form a water-resistant seal.
Cold shrink tube are made from EPDM rubber which does not contain chlorides or sulfur.
If the cable diameter is out of application range, a foam tape will been included is to increase the smallest cable diameter and assure the sealing of the clod shrink tube.
|
 |
|||
 |
Feature & Advantages.
• Simple installation; requires no tools,No torches or heat required.
• Accommodates a wide range of cable sizes
• Good thermal stability
• Seals tight; retains its resiliency and pressure even after prolonged years of aging and exposure
• Excellent wet electrical properties
• Tough rubber formulation withstands backfilling
• No mastic or tape required to seal
• Resists acids and alkalis; resists ozone
|
|||
|
Structure.
Inner diameter of plastic core as supplied-D2: 53 mm
Length after full shrink (nothing inside)-L: 254 mm
Length as supplied-L1: 230 ±10 mm
Application range: 20-46 mm
|
 |
|||
 |
Application.
Item No.: ECS53X203
Material: EPDM rubber
Include: tubbe x1, foam tape x 1
Application: weatherproofing for cell sites
It is used to seal 1/2" jumper cable to antenna or surge arrestor, through DIN, N, 4.3-10 connector.
|
|||
Installation instructions.
Technical Datas.
|
Test item
|
Test Standard
|
Unit
|
Value
|
|
Dielectric Strength
|
GB/T 1695-2005
|
kV/mm
|
17.16
|
|
Waterproof Rate
|
ISO 20653:2013
|
------
|
IP68
|
|
Shore Hardness
|
GB/T 531.1-2008
|
Shore A
|
44
|
|
Tear Strength
|
GB/T 529-2008
|
kN/m
|
28
|
|
Tensile strength
|
ISO 37:2011
|
Mpa
|
9.31
|
|
Elongation at Break
|
ISO 37:2011
|
%
|
720
|
|
Light Ageing-UV Eposure
|
ASTM G154-12a Cycle 1
|
1000h exposure duration with Lamp type: UVA-340 / 8h UV at(60±3)℃ BPT, 0.89W/(m2.nm)@340nm / 4h
condensation at (50±3)℃ BPT |
|
|
Ozone Aging
|
ISO 7326:2006 Method 1
|
Pretreatment temperature: (23±2) ℃/ Pretreatment period: 48h/ Testing temperature: (40±2)℃ /Ozong concentration: (50±5)pphm.
|
|
Selection Table.
* If you need other size, please feel free let us know.
Previous article
Liquid silicone rubber cable cold shrink breakout boots
Cell tower weather proofing solution, cold shrink tubing for 3/8 or 1/2 cable to antenna N, 4.3-10
Next article
Relevant Recommended Products
Part No.
SA-TB
I want to make an inquiry
Part No.
SA-34
I want to make an inquiry
Part No.
AA-34
I want to make an inquiry
Part No.
RK SERIES
I want to make an inquiry