PRODUCTS
EPDM rubber splices cold shrink tubes for coaxial cable connections, similar 3M CXS-4
Part No.： ECS53X203
Quantity
-
+
Retail price：
$ 0
Market value:
$ 0
Remaining stock:
隐藏域元素占位
- Product description
-
Product Description
EPDM rubber splices cold shrink tubes for coaxial cable connections, similar 3M CXS-4
Description.EPDM Cold Shrink Tubes are designed to provide a quick and easy method for protecting and sealing for an inline connection, terminal lug, etc., cold shrink tubing is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core.The core is removed after the tube has been positioned for installation, allowing the tube to shrink and form a water-resistant seal.Cold shrink tube are made from EPDM rubber which does not contain chlorides or sulfur.If the cable diameter is out of application range, a foam tape will been included is to increase the smallest cable diameter and assure the sealing of the clod shrink tube.
Feature & Advantages.• Simple installation; requires no tools,No torches or heat required.• Accommodates a wide range of cable sizes• Good thermal stability• Seals tight; retains its resiliency and pressure even after prolonged years of aging and exposure• Excellent wet electrical properties• Tough rubber formulation withstands backfilling• No mastic or tape required to seal• Resists acids and alkalis; resists ozoneStructure.Inner diameter of plastic core as supplied-D2: 53 mmLength after full shrink (nothing inside)-L: 254 mmLength as supplied-L1: 230 ±10 mmApplication range: 20-46 mm
Application.Item No.: ECS53X203Material: EPDM rubberInclude: tubbe x1, foam tape x 1Application: weatherproofing for cell sitesIt is used to seal 1/2" jumper cable to antenna or surge arrestor, through DIN, N, 4.3-10 connector.Installation instructions.
Technical Datas.
Test itemTest StandardUnitValueDielectric StrengthGB/T 1695-2005kV/mm17.16Waterproof RateISO 20653:2013------IP68Shore HardnessGB/T 531.1-2008Shore A44Tear StrengthGB/T 529-2008kN/m28Tensile strengthISO 37:2011Mpa9.31Elongation at BreakISO 37:2011%720Light Ageing-UV EposureASTM G154-12a Cycle 11000h exposure duration with Lamp type: UVA-340 / 8h UV at(60±3)℃ BPT, 0.89W/(m2.nm)@340nm / 4h
condensation at (50±3)℃ BPTOzone AgingISO 7326:2006 Method 1Pretreatment temperature: (23±2) ℃/ Pretreatment period: 48h/ Testing temperature: (40±2)℃ /Ozong concentration: (50±5)pphm.Selection Table.
* If you need other size, please feel free let us know.
Relevant Recommended Products
Address
5th floor, No.63, Pingcheng North Rd, Haicang Area, Xiamen City, China
Page Copyright © 2025 DEACHO Communication Technology Co., Ltd 闽ICP备19001873号 Powered by 300.cn
