PRODUCTS

Page view：

Product name

N jack clamp connector for 1/2 LDF4-50A RF coaxial cable

Part No.:

NF-Z12-G08

Quantity

Inquiry

Product description

N jack clamp connector for 1/2" LDF4-50A RF coaxial cable

Description.

N-type is a middle and small power connector with threaded connection, whose characteristic impedance can be classified into 500 and 750 two kinds. They have high reliability, shock resistance, excellent mechanical and electrical performance characteristics. It is widely used in radio equipment, communications equipment, microwave test and ground launch system connector RF coaxial cable in vibration and harsh environment. It uses high-precision semi-rigid semi-flexible cable, whose frequency can go up to 11GHz, and get smaller voltage standing wave ratio.

Product Information.

Item No.: NF-Z12-G08

Connector Type: N
Installation method: Clamp type

Gender: female
Matching cable: 1/2"
Size: as drawing

Specification.

Interface
According to	IEC 61169-54
Electrical
Impedance	50 ohm
Frequency	DC-3GHz
VSWR	≤1.10
PIM (@2-tone×20w)	≤-150dBC
Dielectric withstanding voltage	≥1500V RMS, 50Hz, at sea level
Dielectric Resistance	≥5000MΩ
Center contact resistance	≤1.15m Ω
Outer contact resistance	≤1.0m Ω
Mechanical
Mating cycles	≥500 times
Apply with the cable	1/2" coaxial cable
Material and plating
Body	Brass / Tri-alloy plating
Center conductor	Phosphor bronze / Ag plating
Dielectric	PTFE
Other	Brass / Ni plating
Environmental
Temperature range	-40℃~+85℃
Watertightness	IP67
Rosh-compliance	Full Rosh-compliance
Salt-fog test	96h