PRODUCTS

Page view：

Product name

RF coaxial 4.3-10 connectors, clamp screw type for 1/2 inch standard cable

Part No.:

4310M-Z12H-G07

Quantity

Inquiry

Product description

RF coaxial 4.3-10 connectors, clamp screw type for 1/2" standard cable

Description.

The 4.3-10 connector system is designed to meet the rising performance needs of mobile network equipment e.g. to connect the RRU to the antenna. Features of the 4.3-10 Connectors are compact connector sizes, best electrical performance, low PIM and coupling torque as well as the easy installation. Three different coupling mechanisms of the plug connectors screw, quick-lock/push-pull and hand-screw types are suited with all jack connectors.

Application.

Because of its characteristics the 4.3-10 is the ideal candidate for applications in new base stations, as well as for solutions for distributed antenna systems (DAS), in-building architecture and in small cells applications.

In base stations the 4.3-10 can be used for interconnections in the remote radio head as well as interface on the antenna and on the jumpers.

In multi-operator/multiband DAS the 4.3-10 can be used where RF signals have to be combined, terminated, or distributed to the antenna.

In small cells applications the 4.3-10 is particularly suited for the challenging space restrictions and electrical performances requirements.

Specification

nterface
According to	IEC 61169-54
Electrical
Impedance	50 ohm
Frequency	DC-6GHz
VSWR	(DC-3GHz)≤1.12
PIM (@2-tone×20w)	≤-160dBC
Dielectric withstanding voltage	≥2500V RMS, 50Hz, at sea level
Dielectric Resistance	≥5000MΩ
Insertion loss	≤0.15 dB
Mechanical
Mating cycles	≥100 times
Apply with the cable	1/2" coaxial cable
Material and plating
Body	Brass / Tri-alloy plating
Center conductor	Phosphor bronze / Ag plating
Dielectric	PTFE
Other	Brass / Ni plating
Environmental
Temperature range	-40℃~+85℃
Watertightness	IP67
Rosh-compliance	Full Rosh-compliance
Salt-fog test	96h