RF coaxial 4.3-10 connectors, clamp screw type for 1/2 inch standard cable

Part No.： 4310M-Z12H-G07

Quantity

Inquiry

Retail price：

$ 0

Market value:

$ 0

Remaining stock:

Add to Cart

Buy Now

隐藏域元素占位

Product description

RFcoaxial4.3-10connectors,clampscrewtypefor1/2"standardcableDescription.The4.3-10connectorsystemisdesignedtomeettherisingperformanceneedsofmobilenetworkequipmente.g.toconnecttheRRUtotheantenna.Featuresofthe4.3-10Connectorsarecompactconnectorsizes,bestelectricalperformance,lowPIMandcouplingtorqueaswellastheeasyinstallation.Threedifferentcouplingmechanismsoftheplugconnectorsscrew,quick-lock/push-pullandhand-screwtypesaresuitedwithalljackconnectors.Application.Becauseofitscharacteristicsthe4.3-10istheidealcandidateforapplicationsinnewbasestations,aswellasforsolutionsfordistributedantennasystems(DAS),in-buildingarchitectureandinsmallcellsapplications.Inbasestationsthe4.3-10canbeusedforinterconnectionsintheremoteradioheadaswellasinterfaceontheantennaandonthejumpers.Inmulti-operator/multibandDASthe4.3-10canbeusedwhereRFsignalshavetobecombined,terminated,ordistributedtotheantenna.Insmallcellsapplicationsthe4.3-10isparticularlysuitedforthechallengingspacerestrictionsandelectricalperformancesrequirements. SpecificationnterfaceAccordingtoIEC61169-54ElectricalImpedance50ohmFrequencyDC-6GHzVSWR(DC-3GHz)≤1.12PIM(@2-tone×20w)≤-160dBCDielectricwithstandingvoltage≥2500VRMS,50Hz,atsealevelDielectricResistance≥5000MΩInsertionloss≤0.15dBMechanicalMatingcycles≥100timesApplywiththecable1/2"coaxialcableMaterialandplatingBodyBrass/Tri-alloyplatingCenterconductorPhosphorbronze/AgplatingDielectricPTFEOtherBrass/NiplatingEnvironmentalTemperaturerange-40℃~+85℃WatertightnessIP67Rosh-complianceFull Rosh-complianceSalt-fogtest96h

RF coaxial 4.3-10 connectors, clamp screw type for 1/2" standard cable

Description.

The 4.3-10 connector system is designed to meet the rising performance needs of mobile network equipment e.g. to connect the RRU to the antenna. Features of the 4.3-10 Connectors are compact connector sizes, best electrical performance, low PIM and coupling torque as well as the easy installation. Three different coupling mechanisms of the plug connectors screw, quick-lock/push-pull and hand-screw types are suited with all jack connectors.

Application.

Because of its characteristics the 4.3-10 is the ideal candidate for applications in new base stations, as well as for solutions for distributed antenna systems (DAS), in-building architecture and in small cells applications.

In base stations the 4.3-10 can be used for interconnections in the remote radio head as well as interface on the antenna and on the jumpers.

In multi-operator/multiband DAS the 4.3-10 can be used where RF signals have to be combined, terminated, or distributed to the antenna.

In small cells applications the 4.3-10 is particularly suited for the challenging space restrictions and electrical performances requirements.

Specification

nterface
According to	IEC 61169-54
Electrical
Impedance	50 ohm
Frequency	DC-6GHz
VSWR	(DC-3GHz)≤1.12
PIM (@2-tone×20w)	≤-160dBC
Dielectric withstanding voltage	≥2500V RMS, 50Hz, at sea level
Dielectric Resistance	≥5000MΩ
Insertion loss	≤0.15 dB
Mechanical
Mating cycles	≥100 times
Apply with the cable	1/2" coaxial cable
Material and plating
Body	Brass / Tri-alloy plating
Center conductor	Phosphor bronze / Ag plating
Dielectric	PTFE
Other	Brass / Ni plating
Environmental
Temperature range	-40℃~+85℃
Watertightness	IP67
Rosh-compliance	Full Rosh-compliance
Salt-fog test	96h