Page Copyright © 2019 DEACHO Communication Technology Co., Ltd 闽ICP备19001873号 Powered by 300.cn
+86-592-6088457
+86 18030037753
5th floor, No.63, Pingcheng North Rd,
Haicang Area, Xiamen City, China
HOT PRODUCTS
FEEDBACK
CONTACT US
Mobile website
PRODUCTS
Page view:
Product name
Silicone rubber cold shrink tube for sealing of feeder connections, for 3/8 or 1/2 inch cable to antenna N, 4.3-10 or DIN connector
Part No.:
SCS45X152-MD10
Quantity
-
+
Inquiry
Product description
Product Description
Silicone rubber cold shrink tube for sealing of feeder connections, for 3/8" or 1/2" cable to antenna N, 4.3-10 or DIN connector
Description.
SCS series is silicone cold shrink tubes, provide a quick and easy method for protecting and sealing for an inline connection, terminal lug, etc., cold shrink tubing is an open-ended tubular rubber sleeve , pre-expanded on a removable core for easy installation.Silicone cold shrink tube are made from silicone rubber which does not contain chlorides or sulfur.
The core is removed after the tube has been positioned for installation, allowing the tube to shrink and form a water-resistant seal. In applications where the different cable diameter cannot be covered with the tube range, a
foam tape is included in the package. The foam tape is used to increase the smallest cable diameter and assure the sealing of the clod shrink tube.
|
||||
Feature & Advantages.
• Simple installation; requires no tools, no torches or heat required.
• Accommodates a wide range of cable sizes
• Good thermal stability
• Seals tight; retains its resiliency and pressure even after prolonged years of aging and exposure
• Excellent wet electrical properties
• No mastic or tape required to seal
• Resists acids and alkalis; resists ozone
• UV resistant, Ozone-resistant, RoHS compliant
|
||||
Structure.
Item No.: SCS45X152-MD10
Material: Solid silicone rubber
Inner diameter of plastic core as supplied: 45 mm
Length after full shrink (nothing inside)-L: 152 mm
Length as supplied-L1: 135 ±10 mm
Application range: 10-39 mm
Application: use for 3/8" or 1/2" cable to device (antenna, RRU, etc.), via N or 4.3-10 or DIN connector
|
||||
Application.
• Primary electrical insulation for all solid dielectr icinsulated wire and cable splices rated to 1000 volts.
• Physical protection connectors and lugs.
• moisture sealing for connectors and lugs.
• Insulation of secondary splices, copper and aluminum conductors.
• Sheath repairs.
• Insulation for inline conductor transition connector.
|
Installation instructions.
Technical Datas.
Test item
|
Test Standard
|
Unit
|
Value
|
Dielectric Strength
|
ASTM D149-75 @1.75
|
KV/mm
|
21
|
Volume Resistivity
|
ASTM D257
|
Ohm.cm
|
3.4×10^15
|
Waterproof Rate
|
ISO 20653:2013
|
------
|
IP68
|
Shore Hardness
|
GB/T 531.1-2008
|
Shore A
|
44
|
Tear Strength
|
ASTM D624C-73
|
KN/m
|
35
|
Tensile strength
|
ASTM D412-75
|
Mpa
|
10.8
|
Elongation at Break
|
ASTM D412-75
|
%
|
750
|
Bacteria resistance
|
ASTM G21 / expose 28 days
|
----
|
No bacteria
|
Ozone-Resistance
|
ASTM D1149-07
|
----
|
PASS
|
UV-Resistance
|
ASTM G154-06
|
----
|
PASS
|
Flame-Retardance
|
UL 94
|
----
|
HB
|
Working temperature
|
|
℃
|
-60 to 200
|
Selection Table.
* If you need other size, please feel free let us know.
Previous article
Silicone rubber cold shrink tube for ret control cable to antenna
Built-in mastic silicone rubber cold shrink tubes for cell site, 12 jumper cable to RRU or antenna via 4.3-10 or N connector
Next article
Relevant Recommended Products
Part No.
LAQ-DMF-G08
I want to make an inquiry
Part No.
LAQ-DFF-B-G08
I want to make an inquiry
Part No.
LAQ-NMF-3G-G08
I want to make an inquiry