PRODUCTS
Silicone rubber cold shrink tube for sealing of feeder connections, for 3/8 or 1/2 inch cable to antenna N, 4.3-10 or DIN connector
Part No.： SCS45X152-MD10
Quantity
-
+
Retail price：
$ 0
Market value:
$ 0
Remaining stock:
隐藏域元素占位
- Product description
-
Product Description
Silicone rubber cold shrink tube for sealing of feeder connections, for 3/8" or 1/2" cable to antenna N, 4.3-10 or DIN connector
Description.SCS series is silicone cold shrink tubes, provide a quick and easy method for protecting and sealing for an inline connection, terminal lug, etc., cold shrink tubing is an open-ended tubular rubber sleeve , pre-expanded on a removable core for easy installation.Silicone cold shrink tube are made from silicone rubber which does not contain chlorides or sulfur.The core is removed after the tube has been positioned for installation, allowing the tube to shrink and form a water-resistant seal. In applications where the different cable diameter cannot be covered with the tube range, afoam tape is included in the package. The foam tape is used to increase the smallest cable diameter and assure the sealing of the clod shrink tube.
Feature & Advantages.• Simple installation; requires no tools, no torches or heat required.• Accommodates a wide range of cable sizes• Good thermal stability• Seals tight; retains its resiliency and pressure even after prolonged years of aging and exposure• Excellent wet electrical properties• No mastic or tape required to seal• Resists acids and alkalis; resists ozone• UV resistant, Ozone-resistant, RoHS compliantStructure.Item No.: SCS45X152-MD10Material: Solid silicone rubberInner diameter of plastic core as supplied: 45 mmLength after full shrink (nothing inside)-L: 152 mmLength as supplied-L1: 135 ±10 mmApplication range: 10-39 mmApplication: use for 3/8" or 1/2" cable to device (antenna, RRU, etc.), via N or 4.3-10 or DIN connector
Application.• Primary electrical insulation for all solid dielectr icinsulated wire and cable splices rated to 1000 volts.• Physical protection connectors and lugs.• moisture sealing for connectors and lugs.• Insulation of secondary splices, copper and aluminum conductors.• Sheath repairs.• Insulation for inline conductor transition connector.Installation instructions.
Technical Datas.
Test itemTest StandardUnitValueDielectric StrengthASTM D149-75 @1.75KV/mm21Volume ResistivityASTM D257Ohm.cm3.4×10^15Waterproof RateISO 20653:2013------IP68Shore HardnessGB/T 531.1-2008Shore A44Tear StrengthASTM D624C-73KN/m35Tensile strengthASTM D412-75Mpa10.8Elongation at BreakASTM D412-75%750Bacteria resistanceASTM G21 / expose 28 days----No bacteriaOzone-ResistanceASTM D1149-07----PASSUV-ResistanceASTM G154-06----PASSFlame-RetardanceUL 94----HBWorking temperature℃-60 to 200Selection Table.
* If you need other size, please feel free let us know.
Relevant Recommended Products
Antenna lightning arrestor protection 1/4 wave length DIN male to female
Part No. LAQ-DMF-G08
Inquiry
Quarter wave RF lightning arrestor with 7/16 DIN female to female connector
Part No. LAQ-DFF-B-G08
Inquiry
Address
5th floor, No.63, Pingcheng North Rd, Haicang Area, Xiamen City, China
Page Copyright © 2025 DEACHO Communication Technology Co., Ltd 闽ICP备19001873号 Powered by 300.cn
