Search

Page Copyright © 2019 DEACHO Communication Technology Co., Ltd    闽ICP备19001873号   Powered by 300.cn

+86-592-6088457

+86 18030037753

zhenxinrao

info@deacho.com

5th floor, No.63, Pingcheng North Rd,

Haicang Area, Xiamen City, China

 

HOT PRODUCTS

FEEDBACK

CONTACT US

Mobile website

Google+ LinkedIn Facebook Twitter Addthis

PRODUCTS

Page view
Product name

Two ends pulling EPDM cold shrink sleeve for waterproof and insulation

Part No.:
ECS2
Quantity
-
+
没有此类产品
Inquiry
Product description

 

Two ends pulling EPDM cold shrink sleeve for waterproof and insulation

 

Description.

EPDM Cold Shrink Tubes are designed to provide a quick and easy method for protecting and sealing for an inline connection, terminal lug, etc., cold shrink tubing is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core.

The core is removed by pulling out at two ends after the tube has been positioned for installation, allowing the tube to shrink and form a water-resistant seal.

Cold shrink tube are made from EPDM rubber which does not contain chlorides or sulfur.

Feature & Advantages.

• Simple installation; requires no tools,No torches or heat required.
• Accommodates a wide range of cable sizes
• Good thermal stability
• Seals tight; retains its resiliency and pressure even after prolonged    years of aging and exposure
• Excellent wet electrical properties
• Tough rubber formulation withstands backfilling
• No mastic or tape required to seal
• Resists acids and alkalis; resists ozone

 

Technical Datas.

Test item
Test Standard
Unit
Value
Dielectric Strength
GB/T 1695-2005
kV/mm
17.16
Waterproof Rate
ISO 20653:2013
------
IP68
Shore Hardness
GB/T 531.1-2008
Shore A
44
Tear Strength
GB/T 529-2008
kN/m
28
Tensile strength
ISO 37:2011
Mpa
9.31
Elongation at Break
ISO 37:2011
%
720
 
Light Ageing-UV Eposure
 
ASTM G154-12a Cycle 1
1000h exposure duration with Lamp type: UVA-340 / 8h UV at(60±3)℃ BPT, 0.89W/(m2.nm)@340nm / 4h
condensation at (50±3)℃ BPT
Ozone Aging
ISO 7326:2006 Method 1
Pretreatment temperature: (23±2) ℃/ Pretreatment period: 48h/ Testing temperature: (40±2)℃ /Ozong concentration: (50±5)pphm.

Selection Table.

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article

Relevant Recommended Products