+86 592-6088457

info@deacho.com

zhenxinrao

+86 18030037753

Get a quote online

+86-592-6088457

+86 18030037753

zhenxinrao

info@deacho.com

5th floor, No.63, Pingcheng North Rd,

Haicang Area, Xiamen City, China

HOT PRODUCTS

FEEDBACK

Mobile website

PRODUCTS

Home page

Products

Cold Shrink Tubing

Weatherproof Enclosure

Tape

Hanger Solution

Grounding Lightning protection

Coaxial Jumper Cable

Connector/Adapter/End Cap

Cable Entry and Sealing

Support Grip / Pulling Grip

Products at the bottom of home page

Silicone Cold Shrink Tubing

Cell Sites Cold Shrink Tubing

EPDM Cold Shrink Tubing

Cold Shrink End Cap

Cold Shrink Breakout

Two way pulling silicone cold shrink tube for sealing insulated

Page view：

Product name

Two way pulling silicone cold shrink tube for sealing insulated

Part No.:

SCS2

Quantity

Inquiry

Product description

Two way pulling silicone cold shrink tube for sealing insulated

Description.

SCS2 series is two way pulling silicone cold shrink tubes, provide a quick and easy method for protecting and sealing for an inline connection, terminal lug, etc., cold shrink tubing is an open-ended tubular rubber sleeve , pre-expanded on a removable core for easy installation.Silicone cold shrink tube are made from silicone rubber which does not contain chlorides or sulfur.

The core is removed by pulling out at two ends after the tube has been positioned for installation, allowing the tube to shrink and form a water-resistant seal. In applications where the different cable diameter cannot be covered with the tube range, a

foam tape is included in the package. The foam tape is used to increase the smallest cable diameter and assure the sealing of the clod shrink tube.

Feature & Advantages.

• Simple installation; requires no tools, no torches or heat required.

• Accommodates a wide range of cable sizes

• Good thermal stability

• Seals tight; retains its resiliency and pressure even after prolonged years of aging and exposure

• Excellent wet electrical properties

• No mastic or tape required to seal

• Resists acids and alkalis; resists ozone

• UV resistant, Ozone-resistant, RoHS compliant

Technical Datas.

Test item	Test Standard	Unit	Value
Dielectric Strength	ASTM D149-75 @1.75	KV/mm	21
Volume Resistivity	ASTM D257	Ohm.cm	3.4×10^15
Waterproof Rate	ISO 20653:2013	------	IP68
Shore Hardness	GB/T 531.1-2008	Shore A	44
Tear Strength	ASTM D624C-73	KN/m	35
Tensile strength	ASTM D412-75	Mpa	10.8
Elongation at Break	ASTM D412-75	%	750
Bacteria resistance	ASTM G21 / expose 28 days	----	No bacteria
Ozone-Resistance	ASTM D1149-07	----	PASS
UV-Resistance	ASTM G154-06	----	PASS
Flame-Retardance	UL 94	----	HB
Working temperature		℃	-60 to 200